Corner enclosures
The Tulppa corner enclosures were designed to facilitate the construction of enclosures for standpipes in wet rooms, for example.
Tulppa corner enclosures are manufactured using 20 mm thick Tulppa wet room panel, the technical specifications of which can be found here.
Material:
The core of the panels consists of FINNFOAM (XPS) insulation (extruded polystyrene). The core is coated with a special cement mortar and reinforced with a fiberglass mesh on both sides.
Color:
Core: Light yellow
Coating: Red
The corner enclosure is available in the four sizes specifies below.
- Tulppa corner enclosures 200 x 200 mm
- Tulppa corner enclosures 250 x 250 mm
- Tulppa corner enclosures 300 x 300 mm
- Tulppa corner enclosures 400 x 200 mm
Tulppa Corner enclosures
- Dimensions
- Technical details
| Value | Unit | According to | Standard | |
|---|---|---|---|---|
| Length | 200 - 400 | mm | ||
| Width | 200 - 300 | mm | ||
| Thickness | 20 | mm |
| Value | Unit | According to | Standard | |
|---|---|---|---|---|
| Thermal conductivity | EN 12667 | |||
| λ Declared | 0,034 | W/(m K) | EN 12939 | |
| Compressive strength, short-term 45 days, 20 mm | 250 | kPa | CS(10/Y)250 | EN 826 |
| Water vapor permeability | Finnfoam-ydin ≤ 1,5 x 10ˉ¹² | Kg/(msPa) | ||
| Capillarity | 0 |
